Tulsa (918) 257-2087 - Oklahoma City (405) 250-6706

Foundation Repair Oklahoma

Foundation Repair Oklahoma

Before & After Foundation RepairOklahoma soils can be tough on a home’s foundation. The change in weather conditions each season, can wreak havoc on a homes foundation. Some common warning signs are cracks in the drywall and ceiling, or the doors and windows are sticking shut. If you notice these in your home, don’t panic. Just give us a call and we will take care of it. We do free estimates for homeowners.

The cost of foundation repairs vary greatly depending on the property. Some structures require more piers than others. Without a proper foundation inspection, it’s almost impossible to estimate the cost of foundation repair. This is why we do free estimates.

Brean Foundation Repair services the majority of Oklahoma including Tulsa, Oklahoma City, Norman and Stillwater. We are also I certified licensed dealer of DynaPier.

If you notice any warning signs, give us a call and schedule a free estimate.

 

DynaPier Installed Under A FoundationThe Brean DynaPier® System is superior to all other foundation repair systems. Here is how it works:

 

  1. The process is begun by digging a 3′ x 3′ hole to access the bottom of the footing/beam. This may be achieved from inside or outside of the structure. 28 inches of working room below the footing/beam is required.
  2. The segments are carried to the pier location in order to start the installation process.
  3. The DynaPier® system requires minimum clearance due to the fact that no heavy equipment is needed.
  4. The segments are installed using a hydraulic pump.
  5. The patented segments interlock to each other. Due to the patented process, the concentric load is transferred from concrete to concrete.
  6. The segments are driven into the ground one at a time. The process is repeated until bedrock or load bearing strata is reached. Since the segments are driven directly under the footing, the foundation is not jeopardized or damaged by bolting in to or cutting the footing.
  7. The lifting platform is temporarily attached to the pier in order to start the lifting process.
  8. The jacks are set on the platform and the lifting process begins. A manifold lifting system may also be used.
  9. After the house has been lifted, the Pier cap and shims are installed into place. The shims are contained within the pier cap to prevent any future shifting.
  10. The finished pier is installed and the foundation is fixed.
DynaPier Diagram Oklahoma

Contact Us

We Service all of Oklahoma